Semko Communication 5 Pole Rotary Isolator Switch DIN Rail , CE Rohs
KRIPAL HAS THE DESIGN PATENT FOR THIS SERIES SWITCHES.
Description:
Disconnect Switches from KRIPAL are hand-operated switchgear for main circuits with 90° switching angle and are offered as ON-OFF Switches (2, 3, 4, 6 and 8 pole) or as Changeover Switches with centre OFF (2, 3 and 4 pole).
Specifications:
|
No.
|
Tech Parameters
|
requirement
|
|
1.
|
Rated voltage
|
below 440V
|
|
2.
|
rated current
|
10A,16A,20A,25A,32A,40A,50A,63A,80A,100A
|
|
3.
|
frequency
|
AC50HZ
|
|
4.
|
No. of poles
|
2P,3P,4P,5P
|
|
5.
|
No. of layers
|
make as required with circuit diagram
|
|
6.
|
panel size
|
64*64mm
|
|
7.
|
color of handle
|
Black/red
|
|
8.
|
Working temperature
|
-25°C~+40°C
|
|
9.
|
Working height
|
≤2,000m
|
|
10.
|
Relative humidity
|
≤50% with highest temperature +40°C,but allow higher humidity with low temperature less than 40°C
(eg.: humidity 90%----teperature20°C)
|
|
11.
|
Installation conditions
|
pollution class III
|
|
12.
|
Mechanical life
|
0.1*106times
|
|
13.
|
Electrical life
|
0.03*106times
|
|
14.
|
Operative frequency
|
120times/hour
|
|
15.
|
Transform angle
|
90°
|
Applications:
The switches must be selected according to the following performance specifications:
1) According to motor switching capacity, when the switch is fitted in such a way that the operator may use it for operational ON and OFF switching.
2) The rating data always applies to 3 poles. When the motor rating is divided between 6 poles, such as for star-delta switching, a 6 pole switch can be used to control 1.73 times
the rated power.
3) If the switch has a load-shedding Contact (LA), you can select the appropriate switch according to the uninterrupted current. The load-shedding contact is an auxiliary contact, which s closed in the ON position and opens early when witching off, so that a contactor located in the circuit takes over the switching duty and the maintenance/safety switch
operates at zero load. When switching on, the load-shedding contact closes later than or at the same time as the main contacts. With UKP and UKT switches this is the N/O auxiliary contact.
4)The "ON" position can be locked with a padlock (by altering the handle).
This is not permissible for switches with a red/yellow handle.
Features:
• Safety switches are always housed in insulated enclosures and have an inscription saying "Safety Switch" on a bright orange label.
• Switches to be used for emergency stop switching have a red handle and yellow locking collar in accordance with STOP category O (as per IEC/EN 60204/VDE 0113).
• If the switch is not approved for emergency stop switching, both parts will be black ("SW" part no. suffix).
• The cover and handle are interlocked by fitting a padlock.
Installation:
A. front mounting: four pole mounting; single hole mounting;
B. ase mounting: Snap-on mounting (DIN rail 35mm)
C. Enclosed Switches: PC enclosure; stainless steel enclosure
Optional:
a. Netural contacts
b. 1NO+1NC module
c. Color of handle and surroundings
With a broad range of mounting and operator options, KRIPAL Electric can provide economical, versatile and reliable solutions!
Product Tags:
|
|
Semko Communication 5 Pole Rotary Isolator Switch DIN Rail , CE Rohs Images
|
